Race Tech

Race Tech #TMPS4853 - Pin Spanner - 5-5.5 mm

Pin Spanner - 5-5.5 mmFeaturesDesigned to be used with shocks and forks that have holes for unscrewingUnique "back cut" that keeps the pins from slipping outPins are...

Race Tech #TSSC 02 - Shock Spring Compressor - Version 2

Shock Spring Compressor - Version 2FeaturesUses a 19 mm wrench (not included) to remove shock spring and includes four adapters for different size spring collars (60 mm, 66 mm, 72 mm, 75 mm); also...

Race Tech #TFPC 2328 - Rebound Piston Ring

Rebound Piston RingFeaturesCompresses rebound piston ring to allow insertion into the cartridge tubeRequired for assembly of newer KTM forksSpecsModelWPApplicationForkColor/FinishGoldProduct...

Race Tech #TSCP 01 - Retaining Clip Tool

Retaining Clip ToolFeaturesGets behind round wire clips without marring shock bodiesMakes removing shock retaining clips a cinchSpecsApplicationShock Retaining ClipProduct NameShock ToolRiding...

Race Tech #TFCA 02 - Fork Compression Tool

Fork Compression ToolFeaturesOffers users a better way to turn the clickers and remove the compression adjuster during assemblyAllows removal of the fork compression...

Race Tech #TFBT 1010 - Bleeding Tool - Fork

Bleeding Tool - ForkFeaturesKit includes adapters for 10 mm L x 1.0 mm, 12 mm L x 1.0 mm, 12 mm L x 1.25 mm and 14 mm L x 1.0 mm damping rodsEasily threads onto the damping rod to facilitate...

Race Tech #TFDH 01 - Damping Rod Holding Tool

Damping Rod Holding ToolFeaturesWith a tap of a hammer, the taper wedges into the ID of most Damping Rods, late model and vintageDesigned to make spinning damper rods easier to removeSpecsRiding...

Race Tech #TFCT3622 - Fork Cap Showa Tool

Fork Cap Showa ToolFeaturesAllows you to remove the fork compression valve assembly from the top of the cartridgeOne side is 35 mm to fit cartridge and the other is 19 mm for socket or box wrenchBy...

Race Tech #TSCA 24 - Adjuster Socket - Shock Compression - 24 mm

Adjuster Socket - Shock Compression - 24 mmFeaturesThe punch marks at the threads must be drilled 1 mm deep prior to removalFor removal of 24 mm rear shock compression...

Race Tech #TFTT 01 - Fork Tube Tool

Fork Tube ToolFeaturesFor use when assembling and disassembling the fork tube from the axle lugsSpecsApplicationFork TubeUnitsEachProduct NameFork ToolTypeTube RemoverRiding StyleAdventure Touring /...

Race Tech #TFCA 01 - Adjuster - Fork Compression

Adjuster - Fork CompressionFeaturesIt is designed to fit between the handlebar and the top of the fork tubeThe easy way to adjust hard-to-reach fork clickersSpecsMaterialBillet...

Race Tech #TSNH 48 - Hose - Nitrogen

Hose - NitrogenFeaturesThe Quick Connect Nitrogen Hose has special 800 psi "finger tight" 1/4" flare nut quick couplingsThis simple assembly works perfectly with our Nitrogen Regulator...

Race Tech #TSCT 01 - Removal Tool - Bladder Cap

Removal Tool - Bladder CapFeaturesScrews onto the Schrader valve for easy removalSpecsRiding StyleOff-RoadColor/FinishGoldProduct NameCap RemoverUnitsEachTypeReservoir CapApplicationSchrader Valve

Race Tech #TFBT 02S - Bleeding Tool - Cartridge

Bleeding Tool - CartridgeFeaturesKit includes adapters for 10 mm L x 1.0 mm, 12 mm L x 1.0 mm, 12 mm L x 1.25 mm and 14 mm L x 1.0 mm damping rodsEasily threads onto the damping rod to facilitate...

Race Tech #TSPA 01 - Shock Preload Adjuster Tool

Shock Preload Adjuster ToolFeaturesPrevents damage to shock spring collars when pre-load is adjustedBent and rounded tip fits into tight places and minimizes damageSpecsMaterialHardened SteelRiding...