Tools

Motion PRO #08-0636 - Counter/Shaft Seal Puller

Counter/Shaft Seal PullerFeaturesUnique expansion mechanism ensures seal is pulled straight and will not damage engine cases during extractionSafely removes countershaft seals with an inner diameter...

Motion PRO #08-0637 - Pigtail - For Fuel Injector Cleaner

Pigtail - For Fuel Injector CleanerFeaturesFits most OEM HON-F2 fuel injectors used on motorcycle enginesFor use with Motion Pro fuel injector cleanerPigtail onlySpecsMaterial

Motion PRO #08-0641 - Valve Spring Compressor - 24 mm

Valve Spring Compressor - 24 mmFeaturesQuick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valvesWorks on all...

Motion PRO #08-0642 - Chain Tool - Sprocket Jammer™

Chain Tool - Sprocket Jammer™FeaturesPrevents rotation of chain and sprockets for easy removal or installation of countershaft nutCan be used to pull rear wheel against chain blocks when tightening...

Motion PRO #08-0646 - Hose Removal Tool

Hose Removal ToolFeaturesFacilitates removal of fuel and cooling system hosesOne end is used to loosen stuck hose, the other end assists in pulling the hose off the fittingReduces the possibility of...

Motion PRO #08-0648 - Damper Rod Bleed Tool - 5-in-1

Damper Rod Bleed Tool - 5-in-1FeaturesFive thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14 x 1.0Tool design allows for effortless retrieval of damping rod after spring...

Motion PRO #08-0649 - Spark Plug Socket - Pro - 16 mm/5/8"

Can be used as an axle holding tool on bikes with 17 mm or 19 mm internal hex axles. Through hole allows use of screwdriver or holding rod. Will fit 5/8" spark plugs.FeaturesUse with a 3/8" square...

Motion PRO #08-0650 - Spark Plug Socket - Pro - 18 mm/11/16"

Can be used as an axle holding tool on bikes with 17 mm or 22 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm...

Motion PRO #08-0651 - Compression Tester Tool

Compression Tester ToolFeaturesHelps to quickly and easily inspect engine compression on both 2-stroke and 4-stroke enginesRedesigned and Improved billet gauge manifold with integrated pressure...

Motion PRO #08-0652 - Pick Up Tool - Magnetic

Pick Up Tool - MagneticFeaturesProtective rubber coating won't scratch aluminum or plastic surfacesBendable housing retains its shape to access hard-to-reach areasLow profile tip fits in tight...

Motion PRO #08-0653 - Spark Plug Socket - Pro - 21 mm/13/16"

Can be used as an axle holding tool on bikes with 17 mm or 24 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm...

Motion PRO #08-0655 - Swivel Extension Tool - 3/8"

Swivel Extension Tool - 3/8"FeaturesVersatile swivel extension can be turned with a Phillips screwdriver, 1/4" ratchet or driver, or 14 mm wrench or socketIdeal for use with spark plug sockets to...

Motion PRO #08-0656 - Wrench - Fork Cap - 46 mm/50 mm

Wrench - Fork Cap - 46 mm/50 mmFeaturesFor removing the caps on Showa MX forksOne end is 46 mm, and the other end is 50 mmCan be used for removal of the compression stack6061 aluminum material is...

Motion PRO #08-0657 - Replacement Blades - Scraper

Replacement Blades - ScraperFeaturesReplacement blades for Motion Pro Gasket Scraper (PART# 3850-03993)Narrow angled blade designed specifically for small, thin engine casesBlades can be easily...

Motion PRO #08-0663 - Tool - Bearing Separator/U-Joint/Disassembly

Tool - Bearing Separator/U-Joint/DisassemblyFeaturesDesigned to press bearing cups out without damage to the bearings or the yokeCompact design allows U-Joints to be disassembled on the vehicleFully...