Tools

Motion PRO #08-0147 - Wrench - Ratchet Plug

Wrench - Ratchet PlugFeaturesDesigned to fit in limited space on many water-cooled 2-stroke enginesRatchet mechanism works one way; turn over to reverseFits standard 13/16" plugsSpecs

Motion PRO #08-0153 - Side Case Puller - Harley-Davidson/Buell

Side Case Puller - Harley-Davidson/BuellFeaturesIncludes bracket, puller bolt and set screwsUsed to remove the right side-case coverMade in the USADesigned to work with '70 to '99 Big Twin models...

Motion PRO #08-0157 - Spoke Wrench - Classic - 6.5/6.8 mm

Spoke Wrench - Classic - 6.5/6.8 mmFeaturesSquare-end openings grip the spoke nipple on all four sidesOffset slotted end make it easy and quick to useSpecsWrench Size6.8 mm<

Motion PRO #08-0161 - Multi-Purpose Tool

Multi-Purpose ToolFeaturesCan be used to remove 8, 10, 12, 14 mm bolts, #2 and #3 Phillips screws, small and medium straight-slot screws and 5 and 6 mm Hex boltsIncludes a 1/4" and 3/8" socket...

Motion PRO #08-0175 - Spark Plug Socket - 18 mm

Spark Plug Socket - 18 mmFeaturesSocket can be driven with various tools including the Motion Pro® spark plug ratchet wrench, 3/8" ratchet, 13/16" wrench, tool kit bar, or a Phillips screwdriver...

Motion PRO #08-0181 - Carb Tool - Adjuster - Keihin FCR

Carb Tool - Adjuster - Keihin FCRFeaturesIncludes 6 mm hex for main jets, long-reach straight slot for pilot jets and a 3 mm hex for removing the float bowlContains longer bits for reaching into...

Motion PRO #08-0183 - Valve Core Tool - For Schrader Valve - Installation/Removal

Valve Core Tool - For Schrader Valve - Installation/RemovalFeaturesAllows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve)Perfect tool pack...

Motion PRO #08-0185 - Tools - Hex/Ball-End/Assortment - Set

Tools - Hex/Ball-End/Assortment - SetFeaturesBall ends allow for better access to hex socket bolts (up to 25° working angle)Sizes include: 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mmMade from chrome...

Motion PRO #08-0186 - Pliers - Snap Ring

Pliers - Snap RingFeaturesEconomical pliers easily work with both inside and outside opening snap rings or clipsIncludes three extra sets of tips: one additional straight tip and two offset or angle...

Motion PRO #08-0213 - Swingarm Bearing Tool

Swingarm Bearing ToolFeaturesKit includes driver sizes I.D. 20 mm / O.D 26 mm, I.D. 21 mm / O.D. 26 mm and I.D. 22 mm / O.D. 27 mmDesigned for installation of the swingarm bearings on late-model...

Motion PRO #08-0220 - Wrench - Rocker Box Cover - 3/16"

Wrench - Rocker Box Cover - 3/16"FeaturesDesigned to reach hard-to-get-at 3/16" hex screw on the rocker boxes of Big Twin, Sportster and Buell modelsVinyl cover offers comfort and minimizes chances...

Motion PRO #08-0227 - Seal/Bearing Retainer Tool - Honda

Seal/Bearing Retainer Tool - HondaFeaturesPrecision design prevents damage to the retainer ring after peened stakes have been removed by drillingTo remove and replace the rear wheel bearing/seal...

Motion PRO #08-0228 - Seal/Bearing Retainer Tool - 44 mm - CR

Seal/Bearing Retainer Tool - 44 mm - CRFeaturesPrecision design prevents damage to the retainer ring after peened stakes have been removed by drilling44 mm, to remove and replace the rear wheel...

Motion PRO #08-0229 - Carb Tool with Bits - 90°

Carb Tool with Bits - 90°FeaturesIncludes five 1/4" hex drive bits (all 1/2" long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6 mm hex jet bit and 1/4"-hex-to-1/4"-drive...

Motion PRO #08-0230 - Pliers - Masterlink

Pliers - MasterlinkFeaturesOne tip is shorter and notched to be placed on the pin, which allows the longer end to push the clipDesigned to simplify installation and removal of clip-type...