Andrews

Andrews #212260 - A2 Grind Cam

A2 Grind CamFeaturesCam bolts into 66-84 (except 80-81) Big Twin engines with no head work; on 80-81 engines the height of the stock H-D valve guides restricts spring travel (and cam lift) to ...

Andrews #288901 - Cam Gear Install Kit

Cam Gear Install KitFeaturesIncludes all gaskets, bearings and hardware necessary to install gear-driven camsMade in the U.S.A.SpecsProduct NameInstall KitRiding StyleStreetUnitsKitTypeCam

Andrews #216359G - Cam Set - 59HG - Gear Drive - Twin Cam

For 95"+ motors with 10:1 compression ratio or higher.Maximum torque and HP at middle and upper rpm ranges (2400-6200 rpm).Coil bind must be checked but can use stock tappets...

Andrews #288154 - Cam Set - TW54 - Chain Drive - Twin Cam

Designed for 96" and 103" motors that go up to 10.0:1 compression ratio with 2200-5600 rpm range.Includes front cam support plate bearing.'99 Twin Cams require a splined cam drive sprocket...

Andrews #212539 - 7 Grind Camshaft

7 Grind CamshaftFeaturesGreat street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpmUpgraded version of the original #6 grindSpecsRiding StyleStreetGrind7...

Andrews #216901 - Cam Gear Install Kit

For 2006 Dyna Glide and all 2007-2017 Twin cam motors except 110" motors.FeaturesIncludes all gaskets, bearings and hardware necessary to install gear-driven camsMade in the U.S.A.SpecsRiding...

Andrews #216321G - Cam Set - 21HG - Gear Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700-5200 RPM).Similar to the EV-23 cam.Cam works well with fuel injection or carburetor models.Can be used...

Andrews #216326G - Cam Set - 26HG - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection...

Andrews #216355G - Cam Set - 55HG - Gear Drive - Twin Cam

Cams for maximum torque and horsepower at higher rpm ranges (2600-6000+ rpm).Designed for engines with 9.5:1 compression ratio or higher with 88"-95".Coil bind must be checked, but stock...

Andrews #216332 - Cam Set - 32H - Chain Drive - Twin Cam

High-lift version of 31G with 20% more power for 10.0:1+ compression ratio with 2800-5800 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel...

Andrews #216821 - Conversion Camshaft

Bolt-in cams with more torque at low and middle range 1700 - 4800 rpm.Similar to EV23 for heavy bikes.Ideal for heavy bikes with stock compression ratios and stock pistons.Can be used with stock...

Andrews #216331 - Cam Set - 31H - Chain Drive - Twin Cam

Great cam for motors with 95+" and 10.0:1 compression ratio.Lower TDC lift means easy installationSimilar to 37G but different timing (2000-5800 rpm power range).Can be used with stock springs...

Andrews #216321 - Cam Set - 21H - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700-5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be...

Andrews #216812 - Conversion Camshaft

Bolt-in cams with the same output as the stock cams.Slight power increase when compared to stock.No returning of the stock system is necessary.Can be used with stock valve springs and tappets...

Andrews #216015 - Roller Conversion Sprocket

Roller Conversion SprocketFeatures34 teeth with ignition trigger ringMust use with 99-01 engines with stock ignition02-06 engines can use stock rear cam drive sprocketTrigger ring required for 99-01...