Andrews

Andrews #288160 - Cam Set - TW60 - Chain Drive - Twin Cam

Designed for 95"+ motors with major head work.Maximum torque and horsepower at middle and upper ranges from 2700 to 6500+ rpm.Coil bind and valve-to-valve and valve-to-piston clearance must be...

Andrews #288121 - Cam Set - TW21 - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700 - 5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be...

Andrews #288015 - Cam Chain Drive Sprocket

Cam Chain Drive SprocketFeaturesManufactured from 4340 steelCam drive sprockets replace the stock 34-tooth cam drive sprocket and include shimsCrankshaft cam drive is a 17-tooth sprocket that can be...

Andrews #291146 - Cam - EV46 Grind - Evolution Big Twin

Bolt-in performance cam with fast open and close ramps.Similar to "EV3" but higher static compression pressure for 4000+ rpm with stock heads and hydraulic lifters.FeaturesMore mid-range...

Andrews #291130 - Camshaft - EV3 - Evolution Big Twin

Camshaft - EV3 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatA 6000+ rpm cam for stock heads and springs with hydraulic liftersBolt-in cam for light bikes...

Andrews #288137 - Cam Set - TW37B - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection...

Andrews #212030 - Cam - J Grind - Shovelhead

Cam - J Grind - ShovelheadFeaturesMore mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with...

Andrews #288155G - Cam Set - 55G - Gear Drive - Twin Cam

Cams for maximum torque and horsepower at 2600-6000+ rpm.Designed for 88'-95" engines with 9.5:1 compression ratio or higher.Coil bind must be checked, but stock tappets can be used.Not for '06...

Andrews #212020 - Cam - J Grind - Shovelhead

Cam - J Grind - ShovelheadFeaturesMore mid-range and top-end power for street and drag bikes. These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with...

Andrews #212150 - Low-Compression Cam - #1 Grind - Shovelhead

For Late '77 - '84 Shovelhead.FeaturesDesigned with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm rangeDesigned for...

Andrews #212440 - Cam - BH Grind - Shovelhead

A hydraulic version of Andrews "B" grind cams, for '48- '84 Big Twin models.Most are bolt-in, but spring spacing may be required.FeaturesMore mid-range and top-end power for street and drag...

Andrews #212335 - Cam - AB Grind - Shovelhead

Bolt-in street cam has an "A" intake and a long duration exhaust for cooler running and high-end power.Suitable for hydraulic lifters.Not for '80 - '81 Shovelhead.FeaturesMore mid-range and...

Andrews #212140 - Low-Compression Cam - #1 Grind - Shovelhead

For '70 - Early '77 Shovelhead.FeaturesDesigned with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm rangeDesigned for...

Andrews #288126 - Cam Set - TW26A - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Includes front cam...

Andrews #288126G - Cam Set - TW26 - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Not for '06 dyna...