Motion Pro

Motion PRO #08-0386 - Flywheel Puller - Internal Thread - M30 x 1.0

Flywheel Puller - Internal Thread - M30 x 1.0FeaturesLaser etched with Motion Pro logo and part numberUsed for removal of flywheel or rotor if applicableHeat treated for strength and...

Motion Pro Tappet Adjuster Socket Tool - 10 mm

Specs Riding Style: ATV Riding Style: Off-Road Units: Each Riding Style: Adventure Touring / Dual-Sport Riding Style: Street Product Name: Tappet Tool Color/Finish: Black Color/Finish: Blue Type:...

Motion PRO #08-0733 - Tappet Adjuster Tool - 3x9 mm

Tappet Adjuster Tool - 3x9 mmFeaturesIntegrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screwAllows precise valve lash...

Motion PRO #08-0731 - Tappet Adjuster Tool - 3x10 mm

Tappet Adjuster Tool - 3x10 mmFeaturesIntegrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screwAllows precise valve lash...

Motion PRO #08-0721 - Tappet Adjuster Tool Set

Tappet Adjuster Tool SetFeaturesIntegrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw8 mm, 9 mm, and 10 mm lock nut...

Motion PRO #08-0651 - Compression Tester Tool

Compression Tester ToolFeaturesHelps to quickly and easily inspect engine compression on both 2-stroke and 4-stroke enginesRedesigned and Improved billet gauge manifold with integrated pressure...

Motion PRO #08-0714 - Spark Plug Socket - Pro - 14 mm/9/16"

Can be used as an axle holding tool on bikes with 17 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm wrenchInnovative...

Motion PRO #08-0708 - Dowel Puller - 19 mm

Dowel Puller - 19 mmFeaturesTo be used in conjunction with Dowel Pin Puller Set (sold separately)Designed to assist in pulling stuck dowel pins from engine casesSpecsRiding...

Motion PRO #08-0709 - Dowel Puller - 17 mm

Dowel Puller - 17 mmFeaturesTo be used in conjunction with Dowel Pin Puller Set (sold separately)Designed to assist in pulling stuck dowel pins from engine casesSpecsRiding StyleSnowApplicationEngine...

Motion PRO #08-0710 - Dowel Puller - 13.8 mm

Dowel Puller - 13.8 mmFeaturesTo be used in conjunction with Dowel Pin Puller Set (sold separately)Designed to assist in pulling stuck dowel pins from engine casesSpecsRiding...

Motion PRO #08-0711 - Dowel Puller - 12.5 mm

Dowel Puller - 12.5 mmFeaturesTo be used in conjunction with Dowel Pin Puller Set (sold separately)Designed to assist in pulling stuck dowel pins from engine casesSpecsStylePinApplicationEngine...

Motion PRO #08-0700 - T6 Adapter Tool - 18 mm/ 28 mm

T6 Adapter Tool - 18 mm/ 28 mmFeaturesAlternate adapter sizes for the Motion Pro® T-6 Valve Spring CompressorKit includes 18 mm and 28 mm adaptersSpecsProduct NameAdapterRiding...

Motion PRO #08-0703 - Valve Spring Compressor - 24/28 mm

Valve Spring Compressor - 24/28 mmFeaturesQuick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valvesWorks on...

Motion PRO #08-0702 - Valve Spring Compressor - 18/24 mm

Valve Spring Compressor - 18/24 mmFeaturesQuick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valvesWorks on...

Motion PRO #08-0646 - Hose Removal Tool

Hose Removal ToolFeaturesFacilitates removal of fuel and cooling system hosesOne end is used to loosen stuck hose, the other end assists in pulling the hose off the fittingReduces the possibility of...

Motion PRO #08-0686 - Flywheel Puller - Internal Thread with Protector - M28 x 1.0

Flywheel Puller - Internal Thread with Protector - M28 x 1.0FeaturesUsed for removal of the flywheel or rotor if applicableLaser etched with Motion Pro logo and part numberHeat treated for strength...

Motion PRO #08-0655 - Swivel Extension Tool - 3/8"

Swivel Extension Tool - 3/8"FeaturesVersatile swivel extension can be turned with a Phillips screwdriver, 1/4" ratchet or driver, or 14 mm wrench or socketIdeal for use with spark plug...

Motion PRO #08-0653 - Spark Plug Socket - Pro - 21 mm/13/16"

Can be used as an axle holding tool on bikes with 17 mm or 24 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm...

Motion PRO #08-0650 - Spark Plug Socket - Pro - 18 mm/11/16"

Can be used as an axle holding tool on bikes with 17 mm or 22 mm internal hex axles. Through hole allows use of screwdriver or holding rod.FeaturesUse with a 3/8" square drive or 17 mm...

Motion PRO #08-0649 - Spark Plug Socket - Pro - 16 mm/5/8"

Can be used as an axle holding tool on bikes with 17 mm or 19 mm internal hex axles. Through hole allows use of screwdriver or holding rod. Will fit 5/8" spark plugs.FeaturesUse with a 3/8"...

Motion PRO #08-0641 - Valve Spring Compressor - 24 mm

Valve Spring Compressor - 24 mmFeaturesQuick-release system presses straight against the retainer to eliminate side-loading the valve and keepers while not damaging or scratching valvesWorks on all...

Motion PRO #08-0636 - Counter/Shaft Seal Puller

Counter/Shaft Seal PullerFeaturesUnique expansion mechanism ensures seal is pulled straight and will not damage engine cases during extractionSafely removes countershaft seals with an inner diameter...

Motion PRO #08-0631 - Crankshaft Puller

Crankshaft PullerFeatures25 mm and 40 mm face plate adapters ensure the crankshaft is pulled perfectly straight into bearingsPrecision tool used to install press-in crankshafts in an engine...

Motion PRO #08-0600 - Flywheel/Rotor Puller - Crankshaft - Internal Thread - M40 x 1.5

Flywheel/Rotor Puller - Crankshaft - Internal Thread - M40 x 1.5FeaturesRotor remover bolt screws into crankshaft to protect crankshaft while rotor remover is used to remove rotorLaser etched with...