Motion Pro

Motion PRO #08-0131 - T-Handle Tool Set - Mini Pro/Socket

T-Handle Tool Set - Mini Pro/SocketFeaturesSet includes three T-handle wrenches with deep six-point socketsCompact size for easy access and easy transportChrome-vanadium tool steel shaftsDurable hard...

Motion PRO #08-0127 - Hook - Heavy-Duty/Spring

Hook - Heavy-Duty/SpringFeaturesUsed to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other partsSpecsColor/FinishSilverStyleMulti FunctionalRiding...

Motion PRO #08-0119 - Pilot Screw Adjustment Tool - 17"

Pilot Screw Adjustment Tool - 17"FeaturesDesigned for hard-to-reach air/fuel mixture screws with a straight-slot blade tip that can be rotated by rotating the handle110° angled head extends...

Motion PRO #08-0117 - Fork Tool - Damper Rod - Kayaba/Showa

Fork Tool - Damper Rod - Kayaba/ShowaFeaturesAids in assembly and disassembly of most 41 mm, 43 mm, 46 mm and 47 mm Kayaba and Showa inverted forksMade from hardened steelNot required on the '91-'92...

Motion PRO #08-0115 - Tire Lever - Spoon

Tire Lever - SpoonFeaturesRecommended by top tire changersCurved end fits securely in the handSpoon width is 25 mmWeighs 7.1 ozSpecsRiding StyleStreetColor/FinishPewterLength10"Product...

Motion PRO #08-0087 - Wrench - Timing Plug

Wrench - Timing PlugFeaturesFits the straight-slot timing plugs on most motorcycles and ATVsBlade sizes are 16 mm (5/8"), 22 mm (7/8") and 38 mm (1-1/2")SpecsRiding...

Motion PRO #08-0086 - Flywheel Puller - External Thread/Hollow - M20 x 1.5

Flywheel Puller - External Thread/Hollow - M20 x 1.5FeaturesUsed for removal of the flywheel or rotor if applicableLaser etched with Motion Pro logo and part numberHeat treated for strength and...

Motion PRO #08-0074 - Flywheel Puller - External Thread - M22 x 1.5

Flywheel Puller - External Thread - M22 x 1.5FeaturesUsed for removal of flywheel or rotor if applicableLaser etched with Motion Pro logo and part numberHeat treated for strength and...

Motion PRO #08-0069 - Wrench Strap - Oil Filter

Wrench Strap - Oil FilterFeaturesCan also be used to hold other cylindrically shaped partsUse with a 3/8" drive ratchet or extensionMaximum strap diameter 125 mm (5")Fits all spin-on type...

Motion PRO #08-0290 - Fork Cap Tool - Removal

Fork Cap Tool - RemovalFeaturesThe tool is slotted to allow removal and replacement of caps with the P/N 11-0081 Micro Bleeders™This tool allows removal and replacement of the accessory fork...

Motion PRO #08-0278 - Fork Seal Bullet - Protector - White - 47 mm

Fork Seal Bullet - Protector - White - 47 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap...

Motion PRO #08-0277 - Fork Seal Bullet - Protector - Black - 46 mm

Fork Seal Bullet - Protector - Black - 46 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap...

Motion PRO #08-0275 - Fork Seal Bullet - Protector - Green - 43 mm

Fork Seal Bullet - Protector - Green - 43 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap...

Motion PRO #08-0273 - Fork Seal Bullet - Protector - Red - 36 mm

Fork Seal Bullet - Protector - Red - 36 mmFeaturesProtect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the...

Motion PRO #08-0229 - Carb Tool with Bits - 90°

Carb Tool with Bits - 90°FeaturesIncludes five 1/4" hex drive bits (all 1/2" long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6 mm hex jet bit and...