Jims

Jims 74437-96 - Electronic Speedometer Sensor - '00-'06 Softail

Electronic Speedometer Sensor Top-quality replacement sensor Also works on any aftermarket transmission case with a speedometer sensor hole Includes O-ring, hardware and OEM connector Made in the...

Jims 1370 - Valve Keepers - Big Twin

Valve Lock Keys Made from the highest grade materials and heat-treated to JIMS strict standards Feature a 10° lock angle Work well with JIMS titanium valve spring retainers Made in the U.S.A.

Jims 1350K - Valve Spring Kit - Evolution - Big Twin

Valve Spring Kit Incorporate an interference double-spring design with a damper to control harmonics Engineered for maximum performance in severe applications such as high compression and big-inch...

Jims 35042-91 - Mainshaft - Splined Clutch

Transmission Mainshaft

Jims 95660-85 - Seal Driver - Transmission Main - 5-Speed

Optional Seal Driver Optional drivers used in conjunction with main shaft seal tool allow installation of seals

Jims 24022-90 - Gear-Side Pinion Shaft Nut

Gear-Side Pinion Shaft Nut 5/8"-24 left-hand threads

Jims 96780-32A - Piston Pin Keeper Tool

Piston Pin Keeper Tool This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention possible Use to install retaining ring in piston ...

Jims 2246 - Timken® Bearing Race Installer

Timken® Bearing Race Installer Used to install bearing race straight into the left crankcase A must for late-model cases Made in the U.S.A.

Jims 2283 - 5-Speed Transmission Door Puller

Transmission Door Puller Removes transmission door with gears and shaft attached Puller will not damage door bearings Made in the U.S.A.

Jims 24017-80 - Sprocket Shaft Nut

Flywheel-Side Motor Sprocket Shaft Nut Heavy-duty nut fits flywheel-side of sprocket shaft 1-1/8"-16 threads Made in the U.S.A.

Jims 1720 - Main Bearing Remover - 5-Speed

Main Drive Gear Bearing Removal Tool Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A.

Jims 24023-54 - Gear-Side Pinion Shaft Nut

Gear-Side Pinion Shaft Nut 5/8"-24 left-hand threads

Jims 2234 - Primary Drive Lock Tool

Primary Drive Locking Tool Use on all primaries between front primary chain and motor sprocket Made in the U.S.A.

Jims 2256 - Gear Seal Installation - Drive - 5-Speed

Driver Handle Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive gear inner...

Jims 2233 - Tappet Tool - Oil Filter Plug

Tappet Oil Filter Screw Plug Tool Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A.

Jims 1001 - Valve Guide Driver - Set

Shouldered Valve Guide Driver Set Three piece set (3/8", 1/32", 5/16") used to remove or install valve guides Designed for guide removal and installation on all models Made in the U.S.A.

Jims 24016-80 - Pinion Shaft Nut - 3/4-20 Thread

Flywheel-Side Pinion Shaft Nut Heavy-duty nut fits flywheel-side of pinion shaft 3/4"-20 thread Made in the U.S.A. Check rod clearance.

Jims 24331-36 - Wrist Pin Bushing - XL

Wrist Pin Bushing Machined from solid bronze bar stock Hold concentricity to less than .0002" Lead-in edge for easy installation Made in the U.S.A.

Jims 1284 - Holding Tool - Connecting Rod - V-Twin

Rod Holder Tool Holds the rods in place when reaming or honing the wrist pin bushings Made in the USA For most V-Twin and Buell Blast applications.

Jims 25581-70 - Cam Bushing - Big Twin

Cam Cover Bushing Bushings are made from solid bronze bar stock Machined in one operation with a tolerance of .0002" Feature a lead-in for ease of installation Made in the U.S.A.

Jims 2047 - Fork Seal Installer - 41 mm

Fork Seal and Cap Installer Lightly grease to keep from scratching fork tubes Used to install fork and dust seals Made in the U.S.A.

Jims 1169 - Compression Release Guide - Twin Cam

Compression Release Valve Installation Kit Installation kit includes fixture, drill bit, spot face bit and thread-tapping tool Simply drill, spot face, tap and install compression release valves ...

Jims 2260 - Sprocket Lock Tool - Big Twin

Pulley Locker Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A.

Jims 1162 - Caliper Piston Remover

Brake Caliper Piston Remover Prevents damage to pistons and cylinders when installing new seals and wipers Holds pistons square in their cylinder bores during removal Designed for front and rear...