Jims

Jims #5821 - Fork Cap Installer - 49 mm

Fork Cap Installer - 49 mmFeaturesUsed to install fork tube caps without removing the fork legs from the bikeMade in the U.S.A.SpecsRiding StyleStreetApplicationFork CapColor/FinishSilverProduct...

Jims #5827 - Socket - Fork Cap - Allen

Socket - Fork Cap - AllenFeaturesHarley-Davidson® recently updated the fork cap on touring bikes, and you now need a large Allen head socket for disassemblyWorks on touring models with 49 mm...

Jims #2251 - Fork Tube and Leg Holder

Fork Tube and Leg HolderFeaturesMounts in vise to hold fork firmly during repair without causing damage to fork assemblyHolds fork legs and tubes for easy hands-free servicing or rebuildingUse on...

Jims #1776 - Compressor Fork - Front

Compressor Fork - FrontFeaturesAlso includes FLT adapter for FLT forks to eliminate direct contact with spring coil and special rod to pull up fork damper rodTool compresses springs in...

Jims #970 - Axle Locker Tool - 3rd Hand

Axle Locker Tool - 3rd HandFeaturesEliminates the need for a helper or trying to blindly hold the axle from the other side of the tirePrevents axle from moving while torquing down the axle nut after...

Jims #5822 - Swing Arm Bearing Installer

Swing Arm Bearing InstallerFeaturesBoth drive side and brake side bearings, which are at different depths, can be easily and accurately installed with this tool kitJIMS® took it one step further and...

Jims #977 - Wrench - Fork Stem Nut

Wrench - Fork Stem NutFeaturesThis tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removalNormally to get access to the top stem nut requires the need...

Jims #756 - Wrench - O² Sensor - Softail

Wrench - O² Sensor - SoftailFeaturesRemoves and installs O² sensors without removing exhaust pipes12 mmMade in the USASpecsColor/FinishBlackProduct NameWrenchUnitsEachRiding StyleStreetTypeO² Sensor

Jims #955 - Diagnostic Tool - Fuel Pressure/Fuel Injection

Diagnostic Tool - Fuel Pressure/Fuel InjectionFeaturesAccurately diagnose causes of stalling, poor fuel economy, loss of power, hesitation, fuel pump-related problems inside the tank and moreFuel...

Jims #755 - Wrench - O² Sensor - Dyna/V-Rod

Wrench - O² Sensor - Dyna/V-RodFeaturesRemoves and installs O² sensors without removing exhaust pipes12 mmMade in the USASpecsTypeO² SensorColor/FinishBlackRiding StyleStreetUnitsEachProduct...

Jims #954 - Removal Tool - Fuel Pump/Retaining Ring - '08-'13 FL

Removal Tool - Fuel Pump/Retaining Ring - '08-'13 FLFeaturesUse for quick and easy service of fuel filter and other fuel-related partsRemoves/installs retaining ring holding fuel pumpHeavy-duty...

Jims #750 - Spark Tester - In-Line/Ignition System

Spark Tester - In-Line/Ignition SystemFeaturesWorks on all ignition systems, including distributorless ignitionsSupplies a quick, easy visual check of ignition systemMade in the USASpecsRiding...

Jims #752 - Remote Start Button

Remote Start ButtonFeaturesIncludes 4' lead cable with alligator clip for start positive post terminal and motor post negative hookupsHandy for tappet adjustments, servicing and diagnosing starting...

Jims #5804 - Adapter - Clutch Spring Compressor - Victory

Adapter - Clutch Spring Compressor - VictoryFeaturesMade in the USATo be used with clutch spring compressor Part# DS-197060.SpecsRiding StyleStreetProduct NameAdapterFor...

Jims #5502 - Tool - Clutch Adjustment - Ultimate

Tool - Clutch Adjustment - UltimateFeaturesAllows the quick and accurate tightening of the clutch adjusting screw jam nut without having the screw change positionIncludes the proper hex key Allen...