Tools & Hardware

Jims 967 - Inner Primary Bearing/Seal Tool - Installation/Removal - Kit

Inner Primary Bearing and Seal Remover/Installer Tool — Removal/Installation Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs inner primary bearing...

Jims 967-4 - Inner Primary Bearing Tool - Installation/Removal

Inner Primary Bearing and Seal Remover/Installer Tool — Removal/Installation Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs inner primary bearing...

Jims 967-5 - Inner Primary Bearing Tool - Removal

Inner Primary Bearing and Seal Remover/Installer Tool — Removal Safely removes and installs inner primary bearing without any damage to new bearing by pushing on outer perimeter of bearing Also removes and installs inner primary bearing and seal that...

Jims 96780-32A - Piston Pin Keeper Tool

Piston Pin Keeper Tool This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention possible Use to install retaining ring in piston Made in the U.S.A.

Jims 96780-58A - Piston Pin Lock Ring Tool - Big Twin

Piston Pin Lock Ring Tool Use to install lock ring (Harley-Davidson® No. 22582-52) in piston having .515” inner diameter wrist pins, like most aftermarket pistons This tool will install “spiral lock” rings in one easy step without distorting ring, for...

Jims 96830-51 - Pinion Gear Puller - Evolution/Shovelhead

Pinion Gear Puller Use to install pressed on splined pinion gears on Harley-Davidson® Big Twin Also can be used to remove pinion gear on Big Twin's and Sportsters Made in the U.S.A.

Jims 969 - O² Sensor Tool - Socket

O² Sensor Tool Remove and install oxygen sensors on fuel-injected models Socket tool will withstand up to 125 ft.-lbs. of torque Made in the USA

Jims 970 - Axle Locker Tool - 3rd Hand

3rd Hand Axle Locker Tool Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire Prevents axle from moving while torquing down the axle nut after setting belt tension Made in the U.S.A.

Jims 972 - Gear Seal Installer - Main Drive - 6-Speed

Driver Handle Use to install main drive gear oil seal to the proper depth with transmission assembled Includes protective sleeve for seal, which can be used to protect main drive gear inner bearings during installation Made in the U.S.A.

Jims 97235-55B - Sprocket Shaft Bearing Nut Tool

Sprocket Shaft Bearing Nut Wrench Used to install and remove bearing nut Made in the U.S.A.

Jims 97272-60 - Camshaft Bearing Tool - Big Twin

Inner Cam Bearing Install Tool Use to install inner cam bearings Made in the U.S.A.

Jims 97273-60 - Camshaft Bearing Tool - XL

Inner Cam Bearing Install Tool Use to install inner cam bearings Made in the U.S.A.

Jims 973 - Sprocket Bearing Installer Tool

Bearing Adapter Allows installation of shaft bearing on '06 Harley-Davidson® Dyna Glide and all '07-'17 Twin Cam models An adapter for JIMS® Sprocket Shaft Bearing Tool

Jims 974 - Flywheel Holder - Twin Cam

Flywheel Holder This can be used for checking case clearances when building stroker motors or checking valve to valve clearances Can be used to prevent flywheels from turning at the time of disassembly and assembly of engines Use to hold flywheels in...

Jims 975 - Rotator Tool - Engine - Twin Cam

Engine Rotator Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and checking operating clearances Also can be used to keep the flywheel assembly from...

Jims 976 - Rotator Tool - Engine - Big Twin

Engine Rotator Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and checking operating clearances Also can be used to keep the flywheel assembly from...

Jims 977 - Wrench - Fork Stem Nut

Fork Stem Nut Wrench This tool allows the ability to loosen, tighten and torque to spec the 1-1/2” stem nut without radio removal Normally to get access to the top stem nut requires the need to remove the radio package Saves up to 45 minutes for an...

Jims 981 - Main Drive Gear Tool - Cruise Drive/6-Speed

Harley Davidson Cruise Drive 6-Speed Main Drive Gear Installer Tool Holds the main drive gear square to its bearing bore, eliminating any marring of gear or bearings Installs the main drive gear without removing the transmission Made in the USA

Jims 984 - Transmission Door Tool - Big Twin

Transmission Door Puller Removes transmission door with gears and shaft attached Puller will not damage door bearings Made in the U.S.A.

Jims 985 - Shift Shaft Tool - Big Twin

Shifter Shaft Removal Tool Loosens and removes both shifter shafts from transmission door, allowing further disassembly of transmission Made in the U.S.A.

Jims 986 - Main Drive Gear Bearing/Seal Installer Tool - Cruise Drive/6-Speed

Main Drive Gear Bearing/Seal Installation Tool Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install bearings and seal to correct depth Made in the USA

Jims 987 - Main Bearing Installer Tool - Cruise Drive/6-Speed

Harley Davidson Cruise Drive 6-Speed Transmission Main Bearing Installer Tool Safely installs new main transmission case bearing; does not remove bearing Holds bearing square to its bore, eliminating any marring of bearing bore Made in the USA

Jims 988 - Valve Spring - Compressor

Valve Spring Compressor Used to remove and replace valve and new-style conical valve spring Requires use of JIMS Valve Spring Compressor Tool Made in the U.S.A.

Jims 989 - Main Drive Gear Tool

Transmission Sprocket Locknut Wrench Remove hex nut from end of main drive gear that secures the rear drive transmission pulley Inner collar will retain wrench to nut for safer work Extra-long two-piece design Made in the U.S.A.