Camshafts

Andrews #216015 - Roller Conversion Sprocket

Roller Conversion SprocketFeatures34 teeth with ignition trigger ringMust use with 99-01 engines with stock ignition02-06 engines can use stock rear cam drive sprocketTrigger ring required for 99-01 engines with rear cam drive sprockets to permit engine...

Andrews #216309 - Cam Set - 09H - Chain Drive - Twin Cam

Bolt in cam with power through 1000-5400 rpm.Uses stock springs.FeaturesBolt-in cam with more power through the entire rpm range (1000-5400 rpm)Made from alloy steel billets and heat-treated processes are utilizedManufactured with the help of a computer...

Andrews #216321 - Cam Set - 21H - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700-5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with...

Andrews #216321G - Cam Set - 21HG - Gear Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700-5200 RPM).Similar to the EV-23 cam.Cam works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with...

Andrews #216324 - Cam Sprocket

Cam SprocketFeaturesMade in the U.S.A.SpecsRiding StyleStreetProduct NameCamshaftTypeSprocketUnitsEach

Andrews #216326 - Cam Set - 26H - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.FeaturesManufactured with the help of a computer with cam design...

Andrews #216326G - Cam Set - 26HG - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.FeaturesManufactured with the help of a computer with cam design...

Andrews #216331 - Cam Set - 31H - Chain Drive - Twin Cam

Great cam for motors with 95+" and 10.0:1 compression ratio.Lower TDC lift means easy installationSimilar to 37G but different timing (2000-5800 rpm power range).Can be used with stock springs and tappets.FeaturesManufactured with the help of a...

Andrews #216332 - Cam Set - 32H - Chain Drive - Twin Cam

High-lift version of 31G with 20% more power for 10.0:1+ compression ratio with 2800-5800 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and heat-treated processes are utilizedMade in...

Andrews #216337 - Cam Set - 37H - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection.FeaturesManufactured with the help of a computer with cam...

Andrews #216337G - Cam Set - 37HG - Gear Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm) .Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.FeaturesManufactured with the help of a computer with cam...

Andrews #216348 - Cam Set - 48H - Chain Drive - Twin Cam

Duration @ 0.053": Intake 222° | Exhaust 238°.Duration @ 0.020": Intake 257° | Exhaust 273°.FeaturesBroad tip cams for baggers with stock motors; max torque at low and mid rpm rangesManufactured with the help of a computer with cam design...

Andrews #216350 - Cam Set - 50H - Chain Drive - Twin Cam

Designed for 95"+ motors with 9.25:1 compression ratio to 9.50:1 compression ratio and stock heads.For lighter bikes.Cams work best at higher rpm of 2500-6000.Can be used with stock valve springs and tappets.FeaturesManufactured with the help of a...

Andrews #216354 - Cam Set - 54H - Chain Drive - Twin Cam

Designed for 96" and 103" motors that go up to a 10.0:1 compression ratio with 2200-5600 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and heat-treated processes are...

Andrews #216354G - Cam Set - 54HG - Gear Drive - Twin Cam

Designed for 96" and 103" motors up to 10:1 compression ratio.Cams work best at 2200-5600 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and heat-treated processes are...