Engine

Andrews #212539 - 7 Grind Camshaft

7 Grind CamshaftFeaturesGreat street cam, especially for 84/88-inch strokers with maximum torque from 2,200 to 6,500 rpmUpgraded version of the original #6 grindSpecsRiding StyleStreetGrind7 SeriesApplicationExhaustUnitsEachIntake LiftShovel: 0.510"...

Andrews #212610 - Andrews C Grind Cam

Andrews C Grind Cam

Andrews #212890 - Andrews #10 Grind Cam High Performance

Andrews #10 Grind Cam High Performance

Andrews #212960 - Andrews K Grind Cam 61 inch Panhead

Andrews K Grind Cam 61 inch Panhead

Andrews #212965 - N Grind Camshaft - Big Twin

N Grind Camshaft - Big TwinFeaturesStock Knuckle replacement camFor stock motors and restoring an older classic engine, this is the cam to useMade in the U.S.A.SpecsExhaust Duration240°Exhaust Open47°GrindNExhaust Close16°Intake...

Andrews #212970 - Camshaft - S Grind - Big Twin

Camshaft - S Grind - Big TwinFeaturesMade in the U.S.A.This cam is the Knuckle equivalent of a "B" cam in a Pan/Shovel motorBolt-in performance camSmooth idle, strong pull to 6000 rpmSpecsIntake Close55°Intake Duration262°Exhaust...

Andrews #212980 - Andrews K Grind Cam Knucklehead

Andrews K Grind Cam Knucklehead

Andrews #214045 - Cams - PB+ - XL

Cams - PB+ - XLFeaturesBolt-in four-cam setMore horsepower and torqueStock springs OK to 7000 rpm, requires no headworkMade in the U.S.A.Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance...

Andrews #214090 - Andrews Y Grind Cam Set with Alternator

Andrews Y Grind Cam Set with Alternator

Andrews #214380 - Andrews 80 inch ULH 4 Piece Cam Set

Andrews 80 inch ULH 4 Piece Cam Set

Andrews #216015 - Roller Conversion Sprocket

Roller Conversion SprocketFeatures34 teeth with ignition trigger ringMust use with 99-01 engines with stock ignition02-06 engines can use stock rear cam drive sprocketTrigger ring required for 99-01 engines with rear cam drive sprockets to permit engine...

Andrews #216309 - Cam Set - 09H - Chain Drive - Twin Cam

Bolt in cam with power through 1000-5400 rpm.Uses stock springs.FeaturesBolt-in cam with more power through the entire rpm range (1000-5400 rpm)Made from alloy steel billets and heat-treated processes are utilizedManufactured with the help of a computer...

Andrews #216312G - Andrews Cam Set Late Gear Drive 12HG

Andrews Cam Set Late Gear Drive 12HG

Andrews #216321 - Cam Set - 21H - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700-5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with...

Andrews #216321G - Cam Set - 21HG - Gear Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700-5200 RPM).Similar to the EV-23 cam.Cam works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with...