Engine

Andrews #216812 - Conversion Camshaft

Bolt-in cams with the same output as the stock cams.Slight power increase when compared to stock.No returning of the stock system is necessary.Can be used with stock valve springs and tappets.FeaturesAllows upgrade of the '99-'06 Twin Cam (except '06...

Andrews #216821 - Conversion Camshaft

Bolt-in cams with more torque at low and middle range 1700 - 4800 rpm.Similar to EV23 for heavy bikes.Ideal for heavy bikes with stock compression ratios and stock pistons.Can be used with stock valve springs and tappets.FeaturesAllows upgrade of the...

Andrews #216826 - Conversion Camshaft

Bolt-in cams for low rpm torque and two-up touring.Add more torque and horsepower at low and middle range of 1800 - 5200 rpm.Can be used with stock valve springs and tappets.FeaturesAllows upgrade of the '99-'06 Twin Cam (except '06 Dyna Glide) to the...

Andrews #216837 - Conversion Camshaft

Bolt-in cams for 88" or 95" motors.Smooth idle, broad torque band.Run best with low-restriction exhaust with 2200 - 5800 rpm range.Can be used with stock valve springs.FeaturesAllows upgrade of the '99-'06 Twin Cam (except '06 Dyna Glide) to...

Andrews #216855 - Conversion Camshaft

Maximum torque and horsepower with 2600 - 6200+ rpm range.Designed for engines with 9.8:1 to 10.2:1 compression ratio.Coil bind should be checked; can be used with stock tappets (minimum valve travel of .620").Piston-to-valve and valve-to-valve...

Andrews #216901 - Cam Gear Install Kit

For 2006 Dyna Glide and all 2007-2017 Twin cam motors except 110" motors.FeaturesIncludes all gaskets, bearings and hardware necessary to install gear-driven camsMade in the U.S.A.SpecsRiding StyleStreetUnitsKitProduct NameInstall KitTypeCam

Andrews #217460 - Cam - M460 - M8

Also for 117" big bore kits with higher compression.Great low to mid rpm power (1700 to 5500 rpm).FeaturesBolt-in cam for stock compression 107" and 114" enginesSpecsProduct NameCamIntake Lift0.080"Riding StyleStreetExhaust Lift0...

Andrews #217462 - Cam - M462 - M8

Cam - M462 - M8FeaturesBolt-in cam 107”-114” enginesBig power; 127 ft lb and 109 hp (from 1200 to 5500 rpm)SpecsExhaust Duration220°Intake Close14°Intake Lift at TDC0.106"Intake Open6°Product NameCamshaft KitUnitsKitExhaust Lift at TDC0...

Andrews #217464 - Cam - M464 - M8

Cam - M464 - M8FeaturesGreat mid-range torque and power with free-flow exhaust pipes and injector tuningSpecsRiding StyleStreetExhaust Lift at TDC0.080"Exhaust Lift0.460"Intake Lobe Centerline099°Exhaust Duration230°Exhaust Lobe...

Andrews #217465 - Cam - Bolt-In - 465B - M8

Cam - Bolt-In - 465B - M8FeaturesBolt-in chain drive cam for 107”-117” enginesUse with stock valve springsFor heavy and middle weight bikesGreat low to mid rpm torque (1200-5600 rpm)Made in the USACam Specs are measured in the engine on the lifter @ 0...

Andrews #217485 - Cam - Bolt-In - 485 - M8

Cam - Bolt-In - 485 - M8FeaturesHighest lift bolt-in chain drive cam available for use with stock valve springsBolt-in cam for 107” engines and largerExcellent low to mid rpm power (1500 - 5600+ rpm)Cam Specs are measured in the engine on the lifter @ 0...

Andrews #217520 - Camshaft - M520 - M8

Camshaft - M520 - M8FeaturesMade in the U.S.A.SpecsApplicationIntakeRiding StyleStreetUnitsEachExhaust Lift at TDC0.094"Intake Open8°Exhaust Close4°Product NameCamshaftExhaust Duration248°Intake Duration228°Intake Lift at TDC0.115"Exhaust Lift0...

Andrews #217554 - 554 Cam - Big Bore

554 Cam - Big BoreFeaturesFor 124" and 128" big-bore motors with head workMade in the U.S.A.Requires Hi-lift springs.SpecsGrind554 SeriesColor/FinishChromeRiding StyleStreetUnitsEachProduct NameCam

Andrews #240030 - Chromoly Steel Pushrods - Big Twin

Chromoly Steel Pushrods - Big TwinFeaturesPushrods fit Shovel engines using stock diameter tubing so there is no cover tube interferenceFor stock stroke applicationsMade in the U.S.A.SpecsRiding StyleStreetMaterialChromoly SteelUnitsSet of 4Product...

Andrews #240040 - Fixed Moly Pushrod Set

Fixed Moly Pushrod Set