Engine

Andrews #288020 - Crank Shaft Cam Drive Sprocket

Crank Shaft Cam Drive SprocketFeaturesCan be used with OEM cam drive sprocketMade in the U.S.A.SpecsMaterialSteelTypeCrankshaftUnitsEachRiding StyleStreetProduct NameSprocket

Andrews #288121 - Cam Set - TW21 - Chain Drive - Twin Cam

Bolt-in cam for more torque with stock compression.Runs best with low restriction exhausts (1700 - 5200 rpm).Similar to the EV-23 cam.Cams works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well...

Andrews #288121G - Cam Set - 21G - Gear Drive - Twin Cam

Bolt-in cams.Runs best with low restriction exhausts (1700-5200 rpm).Similar to the EV-23 cams.Cam works well with fuel injection or carburetor models.Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.Not for '06...

Andrews #288126 - Cam Set - TW26A - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Includes front cam support plate bearing.FeaturesManufactured with the...

Andrews #288126G - Cam Set - TW26 - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.Not for '06 dyna.FeaturesManufactured with the help of a computer with...

Andrews #288131 - Cam Set - TW31S - Chain Drive - Twin Cam

Great cam for motors with 95"+ and 10.0:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000 - 5800 rpm power range).Can be used with stock springs and tappets.Includes front cam support plate bearing...

Andrews #288131G - Cam Set - 31G - Gear Drive - Twin Cam

Cam for motors with 95+ inches and 10:1 compression ratio.Lower TDC lift means easy installation.Similar to 37G but different timing (2000-5800 RPM power range).Can be used with stock springs and tappets.Not for '06 Dyna.FeaturesManufactured with the...

Andrews #288137 - Cam Set - TW37B - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection.Includes front cam support plate bearing.FeaturesManufactured...

Andrews #288137G - Cam Set - 37G - Gear Drive - Twin Cam

Bolt-in cam.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappets.Works well with carbs or fuel injection.Not for '06 Dyna.FeaturesManufactured with the help of a...

Andrews #288148 - Cam Set - TW48 - Chain Drive - Twin Cam

'99 Twin Cam requires a splined cam drive sprocket.FeaturesBroad tip cams for baggers with stock motors; max torque at low and mid rpm rangesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and...

Andrews #288150 - Cam Set - TW50 - Chain Drive - Twin Cam

Designed for 95"+ motors with 9.25:1 compression ratio to 9.50:1 compression ratio and stock heads.For lighter bikes.Cams work best at higher rpm of 2500-6000.Can be used with stock valve springs and tappets.Includes front cam support plate bearing...

Andrews #288150G - Andrews Cam Set Early Gear Drive #50

Andrews Cam Set Early Gear Drive #50

Andrews #288154 - Cam Set - TW54 - Chain Drive - Twin Cam

Designed for 96" and 103" motors that go up to 10.0:1 compression ratio with 2200-5600 rpm range.Includes front cam support plate bearing.'99 Twin Cams require a splined cam drive sprocket.FeaturesManufactured with the help of a computer with...

Andrews #288155G - Cam Set - 55G - Gear Drive - Twin Cam

Cams for maximum torque and horsepower at 2600-6000+ rpm.Designed for 88'-95" engines with 9.5:1 compression ratio or higher.Coil bind must be checked, but stock tappets can be used.Not for '06 Dyna.FeaturesManufactured with the help of a computer...

Andrews #288157 - TW57 Grind Cam - Twin Cam

TW57 Grind Cam - Twin CamFeaturesBolt-in broad tip cams; 96" , 103" Limited and 110" CVO enginesCams work best at rpm range of 2200-5600SpecsApplicationIntakeExhaust Lift at TDC0.153"Intake Lift0.560"Exhaust Lift0...