Engine

Andrews #216324 - Cam Sprocket

Cam SprocketFeaturesMade in the U.S.A.SpecsRiding StyleStreetProduct NameCamshaftTypeSprocketUnitsEach

Andrews #216326 - Cam Set - 26H - Chain Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.FeaturesManufactured with the help of a computer with cam design...

Andrews #216326G - Cam Set - 26HG - Gear Drive - Twin Cam

Bolt-in cam for lower rpm torque on heavier bikes.For two-up touring.Good power from 1800-5500 rpm.Can be used wit stock springs and tappets.Works well with carbs or fuel injection.FeaturesManufactured with the help of a computer with cam design...

Andrews #216331 - Cam Set - 31H - Chain Drive - Twin Cam

Great cam for motors with 95+" and 10.0:1 compression ratio.Lower TDC lift means easy installationSimilar to 37G but different timing (2000-5800 rpm power range).Can be used with stock springs and tappets.FeaturesManufactured with the help of a...

Andrews #216331G - Andrews Cam Set Late Gear Drive #TW31S

Andrews Cam Set Late Gear Drive #TW31S

Andrews #216332 - Cam Set - 32H - Chain Drive - Twin Cam

High-lift version of 31G with 20% more power for 10.0:1+ compression ratio with 2800-5800 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and heat-treated processes are utilizedMade in...

Andrews #216337 - Cam Set - 37H - Chain Drive - Twin Cam

Bolt-in cams.Smooth idle with broad torque band.Runs best with low restriction exhausts (2200-5800 rpm).Can be used with stock valve springs and tappetsWorks well with carbs or fuel injection.FeaturesManufactured with the help of a computer with cam...

Andrews #216344G - Andrews Cam Set Late Gear Drive #44G

Andrews Cam Set Late Gear Drive #44G

Andrews #216348 - Cam Set - 48H - Chain Drive - Twin Cam

Duration @ 0.053": Intake 222° | Exhaust 238°.Duration @ 0.020": Intake 257° | Exhaust 273°.FeaturesBroad tip cams for baggers with stock motors; max torque at low and mid rpm rangesManufactured with the help of a computer with cam design...

Andrews #216350G - Andrews Cam Set Late Gear Drive #50HG

Andrews Cam Set Late Gear Drive #50HG

Andrews #216354 - Cam Set - 54H - Chain Drive - Twin Cam

Designed for 96" and 103" motors that go up to a 10.0:1 compression ratio with 2200-5600 rpm range.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and heat-treated processes are...

Andrews #216355G - Cam Set - 55HG - Gear Drive - Twin Cam

Cams for maximum torque and horsepower at higher rpm ranges (2600-6000+ rpm).Designed for engines with 9.5:1 compression ratio or higher with 88"-95".Coil bind must be checked, but stock tappets can be used.FeaturesManufactured with the help of...

Andrews #216357 - Cam Set - 57H - Chain Drive - Twin Cam

Bolt-in broad tip cams for 96" and 103" Limited models and 110" CVO motors.Cams work best at 2200 - 5600 rpm.FeaturesManufactured with the help of a computer with cam design capabilitiesMade from alloy steel billets and heat-treated...

Andrews #216359G - Cam Set - 59HG - Gear Drive - Twin Cam

For 95"+ motors with 10:1 compression ratio or higher.Maximum torque and HP at middle and upper rpm ranges (2400-6200 rpm).Coil bind must be checked but can use stock tappets.FeaturesManufactured with the help of a computer with cam design...

Andrews #216360G - Andrews Cam Set Late Gear Drive #60

Andrews Cam Set Late Gear Drive #60