Engine

Andrews #288159G - Cam Set - 59G - Gear Drive - Twin Cam

Cams for Gear Drives Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-treated processes are utilized Made in the USA Four-gear set required for installation. Installer must check coil bind,...

Andrews #288160 - Cam Set - TW60 - Chain Drive - Twin Cam

Designed for 95"+ motors with major head work.Maximum torque and horsepower at middle and upper ranges from 2700 to 6500+ rpm.Coil bind and valve-to-valve and valve-to-piston clearance must be checked.Includes front cam support plate bearing.'99...

Andrews #288160G - Cam Set - TW60 - Gear Drive - Twin Cam

Cams for Gear Drives Manufactured with the help of a computer with cam design capabilities Made from alloy steel billets and heat-treated processes are utilized Made in the USA Four-gear set required for installation. Installer must check coil bind,...

Andrews #288164G - Andrews Cam Set Early Gear Drive #64G

Andrews Cam Set Early Gear Drive #64G

Andrews #288901 - Cam Gear Install Kit

Cam Gear Install KitFeaturesIncludes all gaskets, bearings and hardware necessary to install gear-driven camsMade in the U.S.A.SpecsProduct NameInstall KitRiding StyleStreetUnitsKitTypeCam

Andrews #291113 - Camshaft - EV13 - Evolution Big Twin

Camshaft - EV13 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatBolt-in cam for street or touring use with more mid-range and upper-end power than the stock 88 EV camsUses stock springs; works with carbs or fuel...

Andrews #291123 - Camshaft - EV23 - Evolution Big Twin

Camshaft - EV23 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatBolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleysUses stock springs; works with carbs or fuel injectionCrisp...

Andrews #291127 - Camshaft - EV27 - Evolution Big Twin

Camshaft - EV27 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatBolt-in street cam with fast open and close rampsUses stock springs; works with carbs or fuel injectionPulls from 1500 to 6000 rpmSimilar timing to EV3,...

Andrews #291130 - Camshaft - EV3 - Evolution Big Twin

Camshaft - EV3 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatA 6000+ rpm cam for stock heads and springs with hydraulic liftersBolt-in cam for light bikes (FXRS, etc.) adds significant mid-range power without...

Andrews #291138 - Cam - EV38 Grind - Evolution Big Twin

Longer exhaust cam lowers oil temperature.Great mid-range and high-end power.Lower lift exhaust for easy installation.Bolt-in for lighter bikes (FXLR, etc.)FeaturesMore mid-range and top-end power for street and drag bikes. These cams work with solid or...

Andrews #291146 - Cam - EV46 Grind - Evolution Big Twin

Bolt-in performance cam with fast open and close ramps.Similar to "EV3" but higher static compression pressure for 4000+ rpm with stock heads and hydraulic lifters.FeaturesMore mid-range and top-end power for street and drag bikes. These cams...

Andrews #291150 - Cam - EV5 Grind - Evolution Big Twin

Designed for mildly stroked motors or motors with head work done.Works with stock hydraulics, with stock spring travel set to 0.560" minimum.Excellent power in the 2500-6500 rpm range.FeaturesMore mid-range and top-end power for street and drag...

Andrews #291151 - Camshaft - EV51 - Evolution Big Twin

Camshaft - EV51 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatEasy installationWorks with stock hydraulicsLong duration for modified street motorsPower range from 3000-6500 rpmMade in the USAMust check coil bind,...

Andrews #291159 - Camshaft - EV59 - Evolution Big Twin

Camshaft - EV59 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatDesigned for modified 80" to 88" motorsVery broad powerband to 6000 rpmMade in the USAMust check coil bind, valve-to-valve clearance and...

Andrews #291172 - Camshaft - EV72 - Evolution Big Twin

Camshaft - EV72 - Evolution Big TwinFeaturesCapable of 6000+ rpm with stock springs and no valve floatFor use with Andrews springs and titanium collarsOK for use with hydraulic liftersVery broad powerband, 2800-6000 rpmUpgraded EV7, for 92" or...