Tools

Jims #2046 - Fork Seal Installer - 39 mm

Fork Seal Installer - 39 mmFeaturesLightly grease to keep from scratching fork tubesUsed to install fork and dust sealsMade in the U.S.A.SpecsApplicationFork

Jims #2047 - Fork Seal Installer - 41 mm

Fork Seal Installer - 41 mmFeaturesLightly grease to keep from scratching fork tubesUsed to install fork and dust sealsMade in the U.S.A.SpecsApplicationFork

Jims #2049 - Fork Seal Installation Tool - 49 mm

Fork Seal Installation Tool - 49 mmFeaturesInstalls lower leg 49 mm fork seals squarely into the bore without damaging the seal lip surfaceDesigned for specific Harley-Davidson® models except...

Jims #2122A - Receptacle Extractor Tool for Molex Style Connector

Receptacle Extractor Tool for Molex Style Connector

Jims #2188 - Camshaft Bearing Installer

Camshaft Bearing InstallerFeaturesEasily presses the inner cam bearing smoothly into the right case with the cases assembled to the proper depthMade in the U.S.A.SpecsApplication

Jims #2189 - Jims Transmission Door Installer Tool

Jims Transmission Door Installer Tool

Jims #2232 - Bearing Race Tool

Bearing Race ToolFeaturesRemoves and installs steering head bearing race on 84-16 Big Twin (except 14-16 Dressers), 86-16 XL and 94-02 Buell OEM frames (will also work on most aftermarket frames)Must...

Jims #2233 - Tappet Tool - Oil Filter Plug

Tappet Tool - Oil Filter PlugFeaturesRemoves oil screen without removing exhaustUsed to remove the tappet oil screen plugMade in the U.S.A.SpecsStyleScrew<

Jims #2234 - Primary Drive Lock Tool

Primary Drive Lock ToolFeaturesUse on all primaries between front primary chain and motor sprocketMade in the U.S.A.SpecsRiding StyleStreet

Jims #2237 - Jims Pin Gear Lock Tool

Jims Pin Gear Lock Tool

Jims #2240-11-4 - Adapter - Valve Guide - Insert - 7 mm

Adapter - Valve Guide - Insert - 7 mmFeaturesAdapters are supported by a stand that makes it easy to press valve guides in and outAdapters for working on 7 mm valve guidesMade in the U.S.A.Specs

Jims #2243 - Camshaft Seal Remover and Installer

Camshaft Seal Remover and InstallerFeaturesVery simple tool, just mount tool in cover, screw in the two removing screws, turn center, and out comes the cam sealThe new seal is then pressed in with...

Jims #2244 - Fork Nut Socket - 35 mm - 3/8"

Fork Nut Socket - 35 mm - 3/8"FeaturesUsed to remove and install top fork nuts on fork tubesRubber protector inside socketWill clear most handlebarsMade in the U.S.A.Specs

Jims #2246 - Timken® Bearing Race Installer

Timken® Bearing Race InstallerFeaturesUsed to install bearing race straight into the left crankcaseA must for late-model casesMade in the U.S.A.SpecsStyleLeft Side<

Jims #2251 - Fork Tube and Leg Holder

Fork Tube and Leg HolderFeaturesMounts in vise to hold fork firmly during repair without causing damage to fork assemblyHolds fork legs and tubes for easy hands-free servicing or rebuildingUse on...