Jims

Jims #1754 - Flow Pro 1 Billet Oil Pump Top Line - Polished

For '73-'84 Shovelhead 1/8" NPT Fittings.FeaturesCNC-machined feed and return gears increase pump flow and return volumePumps include cover, gears, drive shaft, seals, gaskets, woodruff keys,...

Jims #1164 - Pistons Support Plate

Pistons Support PlateFeaturesSupport plate gives a non-marring, flat surface to push piston bottoms against when installing rings or cylindersMade in the U.S.A.SpecsApplicationCylinderProduct...

Jims #24002-70 - Sprocket Shaft Oil Seal Spacer

Sprocket Shaft Oil Seal SpacerFeaturesMachined to a 32-micron, burr-free finish for extended seal lifeMade in the U.S.A.SpecsTypeSprocket ShaftProduct NameSpacerRiding StyleStreetUnitsEach

Jims #1147 - Alternator Rotor Puller

Alternator Rotor PullerFeaturesA must-have tool for 45A charging systems; will also work on any Harley-Davidson® alternator system that has threaded puller holesTool protects threads on sprocket...

Jims #26346-69/70 - Oil Pump Shaft - Big Twin

Oil Pump Shaft - Big TwinFeaturesOil Pump Component for Big Twin modelsSpecsTypeOil PumpUnitsEachProduct NameDrive ShaftRiding StyleStreet

Jims #18534-29A - Tappet Roller - Big Twin

Tappet Roller - Big TwinFeaturesMade from 52100 bearing materialIncludes 4340 chromoly axleMade in the U.S.A.SpecsMaterial52100 SteelProduct NameRoller KitUnitsEachTypeTappetRiding StyleStreet

Jims #2046 - Fork Seal Installer - 39 mm

Fork Seal Installer - 39 mmFeaturesLightly grease to keep from scratching fork tubesUsed to install fork and dust sealsMade in the U.S.A.SpecsApplicationForkFork Tube Diameter39 mmRiding...

Jims #1146 - Bearing Tool - Cam Side/Crankshaft - Installer/Remover - Twin Cam

Bearing Tool - Cam Side/Crankshaft - Installer/Remover - Twin CamFeaturesDesigned to protect engine cases by using a specially-designed support block to remove or install cam side crankshaft...

Jims #34761-84 - Clutch Spring Tool - XL '84-'90

Clutch Spring Tool - XL '84-'90FeaturesUse to release the clutch spring tension for disassemblyMade in the U.S.A.SpecsApplicationClutchProduct NameSpring TensionerRiding...

Jims #3998K - Wrist Pin Bushing - Twin Cam

Wrist Pin Bushing - Twin CamFeaturesMachined from solid bronze bar stockHold concentricity to less than .0002"Lead-in edge for easy installationMade in the U.S.A.SpecsTypeWrist...

Jims #95660-77 - Seal Driver - 4-Speed - Big Twin

Seal Driver - 4-Speed - Big TwinFeaturesOptional drivers used in conjunction with main shaft seal tool allow installation of sealsSpecsApplicationTransmissionRiding StyleStreetUnitsEachFor Engine...

Jims #1004A - Clutch Hub Puller

Clutch Hub PullerFeaturesWill also work on Big Twin motor sprocket, alternator cover and early XL clutches as well as many other applicationsCan be used on 3-, 5- or 10-finger clutch hubs and...

Jims #2392 - Head Bolt - Torque Plate

Head Bolt - Torque PlateFeaturesThis accurate gauge allows the measuring of 90° when tightening head boltsTorquing sequence laser engraved on gauge, with instructionsWorks on all Twin Cam and...

Jims #1726-1 - Bushing Reamer - Wrist Pin

Bushing Reamer - Wrist PinFeaturesSome wrist pin bushings will require a small amount of ball honing to give specified fit (see H-D manual for specifications).Used to ream wrist pin bushings to the...

Jims #2043 - Fork Nut Socket - 41 mm

Fork Nut Socket - 41 mmFeaturesEliminates possible burring of plug caused by wrenchesUsed to remove and install top fork-tube plugFits 41 mm forksMade in the U.S.A.SpecsColor/FinishBlackProduct...